Good Nutrition Bio logo GOODNUTRITION Bulk botanical extracts and nutraceutical ingredients supplier for supplement and functional food manufacturers. Request a Quote
GOODNUTRITION Bulk botanical extracts and nutraceutical ingredients supplier for supplement and functional food manufacturers. Request a Quote

Posted in: Ingredient Buyer Guides

Quick answer: Nattokinase activity calculations convert a documented activity in FU/g and the ingredient’s mass into a nominal FU contribution. Multiply the documented FU/g value by the ingredient mass in grams. For a hypothetical powder at 20,000 FU/g, 100 mg is 0.100 g and contributes a calculated 2,000 FU before any processing or storage loss. This arithmetic is not a dosage recommendation, a finished-product assay or evidence of activity through shelf life.

This worksheet helps supplement procurement, formulation and QA teams translate an agreed raw-material activity basis into a calculation for a capsule, tablet or blend. It uses purchaser-supplied inputs. It does not select an intake level or establish whether an ingredient or claim is permitted in a destination market.

Keep nattokinase activity and ingredient mass separate

FU/g expresses a reported activity per gram of material under a defined assay. Milligrams describe mass. A value in FU/g is therefore not the same as FU per capsule, and a capsule’s total fill weight is not necessarily its nattokinase ingredient weight.

Use the activity applicable to the exact grade and the basis approved by your quality team. Record the method, test conditions and whether the number is a specification minimum, a specific lot result or another declared value. Do not assume that two results expressed in FU/g are interchangeable when their analytical methods or reporting bases differ.

The calculation, step by step

  1. Identify the material. Match the proposed ingredient, lot documents and controlled specification.
  2. Confirm the activity basis. Obtain the applicable FU/g value and its analytical definition. Have QA decide which value is suitable for the calculation.
  3. Convert milligrams to grams. Divide the mass of the nattokinase ingredient by 1,000.
  4. Multiply activity by ingredient mass. Nominal activity in FU = documented activity in FU/g × ingredient mass in grams.
  5. Record the scope. Label the result as a calculated ingredient contribution, then assess process and finished-product verification separately.

In symbols, calculated FU = A × m / 1,000, where A is the agreed activity in FU/g and m is the mass in mg of the actual nattokinase material described by that activity value. Do not apply a concentrate’s activity to the weight of a diluted premix.

Worked examples with hypothetical inputs

The following numbers demonstrate unit conversion only. They are not GNB quotations, release specifications, recommended serving amounts or finished-product claims.

Example input activityIngredient massConverted massCalculated ingredient contribution
20,000 FU/g50 mg0.050 g1,000 FU
20,000 FU/g100 mg0.100 g2,000 FU
10,000 FU/g100 mg0.100 g1,000 FU

Suppose a hypothetical 500 mg capsule fill contains 100 mg of the example 20,000 FU/g ingredient and 400 mg of other components. The calculated contribution is 2,000 FU, using 100 mg as the input. Multiplying by the full 500 mg would incorrectly treat every component as that ingredient.

Reverse calculation for a formulation worksheet

Once the responsible formulation and regulatory reviewers have established a project requirement, the mathematical ingredient mass is m in mg = required nominal FU × 1,000 / A. For an illustrative requirement of 1,000 nominal FU and an agreed input of 20,000 FU/g, the calculation gives 50 mg of that material.

This reverse calculation does not establish the requirement itself, account for losses or authorize a label statement. Check whether the resulting mass fits the intended process, blend uniformity controls and capsule or tablet design. Resolve the activity basis before using the result in a purchase order.

Nattokinase FU/g to FU per Capsule: A Calculation Guide — ingredient documentation and sourcing illustration

Premixes, carriers and processing losses

Ask whether a quoted activity applies to the supplied powder as a whole or to a component before dilution. If a premix has its own documented FU/g value, use that value with the premix mass. Do not automatically apply a second carrier correction when the reported activity already describes the supplied material.

Blending, compression, moisture exposure and storage may require project-specific assessment. A raw-material COA does not quantify retained activity after your manufacturing process. For U.S. dietary supplement manufacturing context, review 21 CFR Part 111 with the responsible quality reviewer; its applicability depends on the product and business role. Do not introduce an arbitrary loss allowance or overage to make a spreadsheet meet a target. Agree the validation approach, sampling and acceptance criteria with the relevant technical reviewers.

Separate a lot result from a repeat-order basis

One lot’s measured activity can differ from the minimum in an approved specification. Decide whether a worksheet uses the specification value or an accepted lot result, and retain that decision with the document revision. Do not quietly carry a historical batch result into calculations for future deliveries.

GNB’s nattokinase product page distinguishes a historical batch document from a current offer. Request the documents applicable to the proposed lot. The product-page name alone does not establish current stock or the activity of a future shipment.

Fields to send with a technical RFQ

Use the COA vs. specification guide to distinguish document roles, and send confirmed project requirements through the request-a-quote form. Current commercial details require confirmation for the specific inquiry.

Frequently asked questions

How do I convert nattokinase FU/g to FU for an ingredient amount?

Multiply the agreed FU/g value by the ingredient mass in grams. If the mass is in milligrams, divide it by 1,000 first. Confirm that the activity value applies to the exact material being weighed.

Can I use total capsule fill weight in the calculation?

Only if that entire mass is the material described by the activity value. Otherwise use the mass of that specific ingredient, or the documented activity of the complete premix when applicable.

Does calculated activity prove the finished product’s activity?

No. It is a nominal ingredient calculation. Manufacturing, blend uniformity and storage require a separate verification plan, appropriate methods and agreed acceptance criteria.

Can I compare different suppliers using FU/g alone?

No. Align the method, test conditions, reporting basis and document scope first. Review the exact grade, specification and proposed lot before treating values as comparable.

Need specification, COA, MOQ or lead time? Request Quote WhatsApp Email

Certification and Documentation Support

ISO and other certificates are subject to their stated scope and product applicability. For Halal, Kosher or Organic requirements, request the certificate for the specific product and confirm applicability to the offered batch; no catalog-wide certification is implied.

ISO 9001:2015 certification ISO 22000:2018 food safety certification KOF-K Kosher certification Halal certification USDA Organic certification EU Organic certification